產品特點

1. YX1、 YX2、 YX3型永磁器裝機，采用稀土永磁材料中的“磁鋼王”- 銣鐵硼制造，磁路設計獨特，具有磁體效率高、手柄操作輕和剩磁小、自重輕等優點。
2. 它廣泛的用于黑色金屬板料、圓鋼、管料和成品、半成品模具的起吊及轉運工作。
3. 不需要電源，不受停電影響。
4. 操作手柄工作，使用范圍廣，簡單易行。
5. 安全系數高（大于3），在搬運額定負荷時，對起重設備的加速、換向及繩索的擺動都會有足夠的安全度。
6. 起重器可在0.5mm氣隙的情況下吸起額定平面負荷；
7. 由于使用了稀土永磁材料，吸力長期穩定。

Brief Introduction

1. The installation of YX1, YX2 and YX3 permanent magnetic components adopts “king of magnetic steel” among rare earth permanent magnet materials, which is made of NdFeB. They have such advantages as unique magnetic path design, high magnet efficiency, light handles, small residual magnetism, and light dead weight.
2. It is widely applied to the lifting and transportation of ferrous metal materials, round steels, pipes, finished and semi-finished moulds.
3. No need for power supply, not influenced by power failure;
4. The operating handle is widely used and easy to operate;
5. High safety coefficient (above 3): when it transports a rated load, the acceleration and reversing of lifting equipments and the swinging of ropes have enough degree of safety;
6. A jack can attract a rated load in the condition that the air gap is 0.5mm;
7. Since it uses rare earth permanent magnet materials, its attractive force is of long-term stability.